disc round shot blasting machine

disc round shot blasting machine is a special equipment for cleaning wire coils. It is mainly used for shot blasting of carbon steel, stainless steel and other alloy coils to remove oxide scale and dirt on the wire surface, so as to make the surface of the workpiece appear metal color, so as to improve the surface quality of the workpiece and meet the requirements of the subsequent production process.

This machine has the advantages of short time to scale, low operating cost, high efficiency, meet the requirements of environmental protection, and achieve the effect of removing scale without pickling.

QPY5500 type disk shot blasting machine, has the following characteristics:

1. Adopting the current international popular double-station design, the outer stations complete the preparation of feeding while cleaning the disc circle. The production efficiency is doubled than the single station design;

Compared with pickling, the dish is roundshot blastingcleaning, not only pollution-free, but also can significantly improve the internal quality of steel, eliminateinternal stress, to improve the fatigue resistance, this method should be the ideal choice for the future round cleaning.

3. Compared with single wire cleaning machine, coil cleaning machineshot blastingcleaning efficiency is high, eliminating the uncoiling and winding devices of the wire cleaning machine. Although the initial investment is relatively high, the input-output ratio is incomparable to that of a single wire cleaning machine.

use of special shot blasting device and special shot blasting device layout, cleaning effect is better than imported similar products.

5. The unique gate design is adopted. A specific number of bosses are distributed on the surface of the mandrel according to a specific law. After the gate is closed, the coil is evenly expanded and vibrated up and down through the rotation of the mandrel, so that the coil can be fully ejected and the dead angle of ejection is eliminated.

6. The mechanism design of double lifting and double separation is adopted to make the separation of pellets cleaner, the distribution of pellets more reasonable, and the cleaning effect is guaranteed.

7, electrical control components are mainly imported high-quality components, stable and reliable performance.

8. The input cost of the whole machine is lower, only about 1/5 of similar imported products, and the maintenance cost is low, and the after-sales service is timely.

9, the traditional wire rod shot rust removal is mostly single-line through the form, low work efficiency, poor rust removal effect, coupled with the limitation of industrial manufacturing level, in addition to the ability to remove iron oxide is far less than pickling. The use of pickling, on the one hand, the resulting waste acid, washing water, toxic gases on the environment can not be cured pollution, and increase the consumption of metal materials; on the other hand, improper operation will cause steel wire surface pitting, hydrogen embrittlement and other defects, reduce the yield. This machine is simple to operate, efficient and environmentally friendly, and solves the environmental bottleneck of enterprise development. It is an ideal choice for cold drawing industry to replace pickling.

Qingshan steel plate round shot blasting machine