steel shot blasting machine
Usage Introduction
Q69 series steel plate, profile shot blasting machineIt is suitable for surface rust removal of steel plates, profiles and structural parts in ships, automobiles, rolling stock, bridges, machinery and other industries.
technical parameters
Q69 series through roller shot blasting machine technical parameters:
|
Model |
Q698 |
Q6912 |
Q6915 |
Q6920 |
Q6925 |
Q6930 |
|
Length (mm) |
≥1000 |
≥1200 |
≥1500 |
≥2000 |
≥2000 |
≥3000 |
|
Plate width(mm) |
≤800 |
≤1200 |
≤1500 |
≤2000 |
≤2500 |
≤3000 |
|
H steel height(mm) |
≤300 |
≤400 |
≤500 |
≤600 |
≤700 |
≤800 |
|
H steel height(mm) |
≤1200 |
≤1800 |
≤1800 |
≤2000 |
≤2000 |
≤2000 |
|
Cleaning speed(m/min) |
0.5-4 |
0.5-4 |
0.5-4 |
0.5-4 |
0.5-4 |
0.5-4 |
|
Blasting capacity kg/min |
4X200 |
4X250 |
4X250 |
6X250 |
6X250 |
6X360 |
|
Blasting capacity kg/min |
8X125 |
8X125 |
8X200 |
8X250 |
8X250 |
8X250 |
Specific Feature
1. The main pulley of the hoist adopts a cylindrical structure, and the passive wheel adopts an attached plate structure. The cylindrical structure of the main pulley prevents the belt from being scratched due to the attached plate structure. The passive wheel adopts an attached plate structure to prevent projectiles from remaining between the pulley and the belt, thus wearing the belt, which is beneficial to increase the friction between the belt and the pulley.
2. The shell of the hoist is lined with manganese plate as wear-resistant guard plate at the falling end of the hopper to improve the service life of the shell.
3. The hopper of the hoist adopts a counterbore structure to completely prevent tearing caused by the external belt bolt and the belt pulley.
4. The anti-reverse device of the hoist adopts a reducer brake device without noise. Tightening device wide adjustment range, adjustable range of 1~15cm.
5. Shot blasting chamber is attached to the chamber, which is sealed with multi-layer rubber plates to completely prevent the projectile from overflowing.
6. The shot blasting machine plc is equipped with a time accumulation function for wearing parts to prevent damage to the shot blasting room and guard plate due to damage to wearing parts.
7. Shot blasting chamber guard plate: The guard plate at the opening of the shot blasting device adopts an integral structure to prevent the wear of the guard plate and the chamber body around the shot blasting device due to the assembly gap.
8. The position of the directional sleeve on the shot blasting device is marked to reduce the adjustment time.
9. The filter cartridge of the dust collector adopts the American Donaldson filter material, which has good filtering effect, strong permeability and long service life.
10. The arrangement of shot blasting chamber and shot blasting device are determined after computer three-dimensional dynamic ejection simulation.
11, the use of Swiss GF company technology production of high-efficiency direct shot blasting device, double disc linear blades, smooth operation, durable can significantly improve the cleaning efficiency, obtain satisfactory cleaning quality, reduce maintenance costs.
12, the separation device adopts overflow induction, full curtain flow curtain type pellet slag separator, the separation efficiency can reach 99.9.
